Chat Online with UNIPOWER Corporation Representative
Commercial / Industrial / Medical Power SolutionsFor Information call:
North America: +1 (954) 346-2442 x1071
Europe: +44 (0)1903 768200
View Cart

Ranger TRPI Series - Bulk Power Front Ends

All products can be customized to meet specific requirements.
Hot-Swap 2U, 1250W, 2000W, 2500W

AC Front End, 1250W-2500W, Ranger TRPI, Power Suppy

PDF Datasheets

For Support call:
North America: 954-346-2442 x1071
Europe: +44(0) 1903 768 200
Models Available
Models Output Voltage Output Current Max Output Power Input Voltage Minimum Load Buy
TRPI3000 12.0V 104.2A 1250W 85-264VAC 0A Call to Order
TRPI5000 24.0V 52.1A 1250W 85-264VAC 0A Call to Order
TRRI5000 24.0V 83.3A 2000W 180-264VAC 0A Call to Order
TRSI5000 24.0V 104.2A 2500W 180-264VAC 0A Call to Order
TRPI6000 28.0V 44.6A 1250W 85-264VAC 0A Call to Order
TRRI6000 28.0V 71.4A 2000W 180-264VAC 0A Call to Order
TRSI6000 28.0V 89.3A 2500W 180-264VAC 0A Call to Order
TRPI7000 48.0V 26.0A 1250W 85-264VAC 0A Call to Order
TRRI7000 48.0V 41.7A 2000W 180-264VAC 0A Call to Order
TRSI7000 48.0V 52.1A 2500W 180-264VAC 0A Call to Order
High Voltage DC Input available, please consult factory.

Features and Options

85% Efficiency
Power Factor Correction
Up to 10.9W/Cu. Inch Power Density
Hot-Swap N+1 Redundant
2U 19-inch Rack Mounting
±10% Output Adjustment Range
Low Cost
12V, 24V, 28V or 48V Output
1250, 2000 or 2500W Module Power
Up to 7500W Non-Redundant 2+1
Up to 5000W 2+1 Redundant
Integral Isolation Diodes
Output Current Limiting
Inrush Current Limiting
Remote Output Adjust

Specifications Overview

Typical at Nominal 230VAC Line, Full Load and 25ºC Unless Otherwise Noted.

Safety Standards

UL60950-1
CSA C22.2 No. 60950-1
IEC 60950-1

Warranty

Three Years

Input Specifications

Input Voltage Range: See Model Table
Power Factor: 0.98
Input Frequency: 47-63Hz
Inrush Limiting: 25A Peak
Input Current, Full Load,
- TRSI: 13.1A@230VAC
- TRRI: 10.4A@230VAC
- TRPI: 12.5A@120VAC
Input EMI Filter, Conducted: EN55022 Curve B, FCC20780 pt. 15J Curve B
Harmonic Distortion: EN61000-3-2
Input Immunity, Conducted
- Fast Transients, Line-Line: ±2kV (EN61000-4-4 Level 3)
- Surges, Line-Line: ±1kV (EN61000-4-5 Level 2)
- Surges, Line-Ground: ±2kV (EN61000-4-5 Level 3)
Input Protection, Internal Fuse: 20A

Output Specifications

Total Output Power, Max: 1250, 2000 or 2500 Watts
Voltage Adjustment Range: ±10%
Total Regulation: 1.0%
Ripple & Noise, Pk-Pk: 125mV, 12V Models - 250mV, 24V & 28V Models - 500mV, 48V Models
Holdup Time: 20ms
Dynamic Response4: 1ms
Temperature Coefficient: 0.05%/ºC
Minimum Load: 0A
Overload Protection: Constant Current Limiting
Overvoltage Protection: Latched Shutdown
Active Current Share5: 10% Differential From Rated Current
Remote Sense: Up to 0.5V Per Wire

General Specifications

Efficiency: 85% at Full Load
Switching Frequency: 70kHz Nominal
Overtemperature Protection: Power Shutdown
Isolation, Class I6 , min: 3000VAC Input-Output - 1500VAC Input-Ground - 50VDC Output-Ground
Safety Standards: EN60950-1, UL60950-1, CSA22.2 No.60950-1

Physical Specifications

Case Material
- Module: Aluminum
- Rack Mount: Steel
Finish, Rack Mount: Powder Coat Gray
Dimensions, Inches (mm)
- Hot-Swap Module: 3.3H x 4.9W x 13.1D (84 x 124 x 333)
- Rack Mount: 3.50H x 17.20W x 19.88D (89 x 437 x 505)

Environmental Specifications

Operating Temperature: 0ºC to 70ºC Ambient
Derating: 2.5% / ºC, 50ºC to 70ºC
Storage Temperature: -40ºC to +85ºC
Cooling: Integral Ball Bearing Fan