Chat Online with UNIPOWER Corporation Representative
Commercial / Industrial / Medical Power SolutionsFor Information call:
North America: +1 (954) 346-2442 x1071
Europe: +44 (0)1903 768200
View Cart

Radian TPCM Series - Front End Advanced Power Switcher – PowerCassette

All products can be customized to meet specific requirements.
1U High, 480-1200 Watts with PFC and Hot-Swap

Models Available
Models Output Voltage Output Current Max Output Power Input Voltage Buy
TPCM3000 12VDC 54.2A 650W 85-264VAC Call to Order
TPCM3000E 12VDC 40.0A 480W 85-264VAC Call to Order
TPCP3000 12VDC 66.7A 800W 85-264VAC Call to Order
TPCM5000 24VDC 29.2A 700W 85-264VAC Call to Order
TPCM5000E 24VDC 21.9A 525W 85-264VAC Call to Order
TPCP5000 24VDC 41.7A 1000W 85-264VAC Call to Order
TPCP6000 28VDC 35.7A 1000W 85-264VAC Call to Order
TPCP7000 48.0VDC 25.0A 1200W 85-264 Call to Order
TPCM7000 48VDC 16.7A 800W 85-264VAC Call to Order
TPCM7000E 48VDC 12.5A 600W 85-264VAC Call to Order
High Voltage DC Input available, please consult factory.

Features and Options

Includes Isolated 5V, ¼A Standby Output
Hot-Swap or Chassis Mount Versions
12, 24 or 48VDC Outputs
I²C Serial Data Bus Option
Integral LED Status Indicators
Up to 10 Watts/Cubic Inch Power Density
Power Factor Corrected
Low Profile: 1.6 Inches (41mm) High
Single Hot-Swappable Connector
AC Front Entry Version
Reverse Air Flow Option
Staged Pin Engagement
ORing Diodes on Output
1U, 19” Racks Hold 2 or 3 Units*
Active Current Sharing
Universal 85 to 264VAC Input
Class B EMI Input Filter
Optimized Thermal Management
No Minimum Load
Control & Monitoring Features
Front End Power Switcher
SEMI F47 Compliant at Hi-Line

Specifications Overview

Typical at Nominal 115/230VAC Line, Full Load and 25ºC Unless Otherwise Noted.

Safety Standards

UL60950-1
CSA C22.2 No.60950-1
IEC60950-1

Warranty

Three Years

Input Specifications

Input Voltage Range: 85-264VAC
Power Factor: 0.99
Input Frequency: 47-63Hz
Inrush Current Limiting: 50A Peak
Input EMI Filter: EN55022 Curve B
FCC20780 pt. 15J Curve B
Harmonic Distortion: EN61000-3-2
Input Immunity, Conducted
- Fast Transients, Line-Line: ±2kV (EN61000-4-4 Level 3)
- Surges, Line-Line: ±2kV (EN61000-4-5 Level 3)
- Surges, Line-Ground: ±4kV (EN61000-4-5 Level 4)
Input Protection: Internal Fuse, 20A

Output Specifications

Total Output Power
Continuous, Max: 800-1200 Watts
Voltage Adjustment Range, Min: ±5%
Total Regulation: 2.0%
Total Regulation, Standby Supply: 5.0%
Ripple & Noise, Pk-Pk: 1%
Holdup Time: 20mS
Dynamic Response: 300μS
Temperature Coefficient: ±0.02%/ºC
Minimum Load: 0A
Overload Protection: Auto Recovery
Overload Protection: Auto Recovery
Overvoltage Protection: Latched Shutdown
Remote Sense: Up to 0.25V Per Wire
Current Share: ±10% Full Load Rating
Standby Output: +5V, 250mA
DC Power Good Signal: Logic Low
AC Power Fail Signal: Logic High
Global Inhibit: Logic Low
Enable: Logic Low
Thermal Warning: Logic High

General Specifications

Efficiency: 80-87% at Full Load
Switching Frequency
- PFC Converter: 48-110kHz
- Output Converter: 275kHz Nominal
Isolation, Class I, min.
- Input-Output: 3000VAC
- Input-Ground: 1500VAC
- Output-Ground: 50VDC
MTBF (Bellcore): 200,000 Hours

Physical Specifications

Case Material: Aluminum
Dimensions, Inches(mm): 1.6 H x 5.0 W x 10.0 D (40.6 x 127 x 254)
Weight: 2.9 lbs. (1.3 kg.)

Environmental Specifications

Operating Temperature: 0ºC to 70ºC Ambient
Derating: 2.5% / ºC, 50ºC to 70ºC
Storage Temperature: -40ºC to +85ºC
Cooling: Integral Ball Bearing Fans