:
Call Us at 954-346-2442
Unipower Telecom Homepage About Unipower Contact Unipower Reps & Distributors Customer Service
You are here   ››   

Product Line

   ››   

Hot-Swap Inverters

                 ››   

INV5000-230 Telecom Inverter

> GET NEWSLETTER

> GO TO BLOG

All products can be customized to meet specific requirements. Give us a call today.

North America:
954-346-2442 x.325

Europe:
+44(0) 1903 768200

Email: Click Here


Visa-MasterCard-Accepted


INV5000-230 Telecom Inverter

TWO RACK SPACES HIGH

5000VA TELECOM INVERTERS

Click here to view the .pdf file

Unipower Telecom's INV5000-230 Series are 5000 volt-ampere sine wave inverters which come in two rack spaces (3.5 inches) high shelves. The units operate off a 48VDC (42-56V range) input and produce a 230VAC output at 22 amperes. The low distortion 50 or 60Hz sine wave is produced using MOSFET and IGBT power semiconductors and advanced high-frequency, pulse-width modulation techniques which achieve 90% efficiency and 4.8VA per cubic inch power density.

 

The units can be paralleled for higher output power or for N+1 redundant applications. They are fully isolated from the telecom battery.

 

Input circuit breakers turn the inverter on and protect the battery from input faults. Output breakers connect the inverter to the load bus (after synchronization if the bus is live) and quickly disconnect the inverter in the event of an internal fault. The inverters have high surge capability for starting loads such as motors, but the output breakers quickly trip if power attempts to flow back into a faulted inverter.

 

Front panel LEDs indicate inverter status, and Form C alarm contacts are available on the back. The unit is self-cooled by internal fans and comes with a clear plastic rear safety cover.

TELECOM INVERTERS

MODEL

INPUT

 OUTPUT

FREQ.

INV5000-230/50

48VDC

230VAC

50Hz

INV5000-230/60

48VDC

230VAC

60Hz

FEATURES

  • Two Rack Spaces High: 3.5"
  • 19- or 23-Inch Rack Mounting
  • 5000VA Output
  • 4.8 VA per Cubic Inch Density
  • 230VAC Output
  • Low Distortion 50 or 60Hz Sine Wave
  • 42 to 56 VDC Input
  • Fully Isolated from Battery Input
  • 90% Typical Efficiency
  • Up to 300% Surge Capability
  • Circuit Breaker Input & Output Protection
  • Powers Reactive Loads
  • Parallel Capable
  • N+1 Redundancy
  • Overtemperature Protection
  • Weight: 31.3 lbs. (14.2 kg.)
  • Form C Relay Contacts

SAFETY CERTIFICATIONS

  • UL1950
  • CSA22.2, No. 950
  • EN60950

TWO-YEAR WARRANTY

 

 

Click here to view the .pdf file

NOTE: To print out the data sheet, you may print from your browser or see a detailed .pdf spec sheet from within Adobe Acrobat. If you need Adobe Acrobat Click Here to download the plug-in.