Distribution Panels

ONE MOUNTING POSITION HIGH

GMT FUSE PANELS

Click here to view the .pdf file

Unipower Telecom’s DPG1U Series of GMT fuse distribution panels provide distribution and overload protection for 10 or 20 circuits. The one mounting position (1.75 inches) high GMT fuse panels provide 10 single-bus fuses or 20 dual-bus (A&B) fuses (10 per bus). They distribute up to a total of 160 amperes of load current from two separate 80-ampere sources with true A and B distribution and alarm capabilities. A and B sections of the dual-bus panel are isolated and can be separately configured for 12, 24 or 48 volts, positive or negative ground. Fuse sizes are ½ to 12 amperes.

Fuse alarm is indicated by a dual-color LED (green/red) for each bus and two Form C relay contacts per bus.

The panels come with brackets that permit mounting in either a 19- or 23-inch relay rack. They can be mounted from the front of the rack with offsets every quarter-inch from front to back to align with existing rack-mounted equipment.

DISTRIBUTION PANELS
MODEL	BUS	FUSES
DPG1U-A	SINGLE 80A	10
DPG1U-A-B	DUAL 80A	10 / 10

FEATURES

One Mounting Position High: 1.75”
19- or 23-Inch Rack Mounting
GMT Fuses
Single Bus with 10 Fuses
Dual Bus (A/B) with 10 Fuses per Bus
Bus Capacity: 80A per Bus
Operating Voltage: 12, 24 or 48VDC
Positive or Negative Ground
A & B are Isolated Loads
A & B Can Be Separately Configured
½A to 12A Fuses
Green/Red: LED Fuse Alarm
Two Form C Relay Contacts per Load
Rack Offset Every ¼”, Front to Back
Distribution Panels

SAFETY STANDARDS

UL60950-1
CSA22.2, No. 60950-1
EN60950-1

TWO-YEAR WARRANTY

Click here to view the .pdf file

NOTE: To print out the data sheet, you may print from your browser or see a detailed .pdf spec sheet from within Adobe Acrobat. If you need Adobe Acrobat Click Here to download the plug-in.

View More Distribution Panels

Product Line

DPG1U Series