NEWS RELEASE
February 23, 2001 Editorial
Contact: Eugene Zuch
954-346-2442
3600-WATT, HOT-SWAP FRONT END
POWER SYSTEM IS ONLY 2U HIGH
Coral Springs, Florida-UNIPOWER's
new TMP Series front-end power systems provide up to 3600 watts output at 24,
28 or 48VDC for distributed power systems. The front end consists of up to
three hot-swap, 1200-watt modules in a 2U (3.5-inch) high, 19-inch rack mount.
The system can be operated as either a 3600-watt non-redundant system or a 2400
watt, N+1 redundant unit. The rack system provides an easy-connect interface to
the host system. The TMP Series has 6.6 watts per cubic inch power density and
85% efficiency.
Important operating features
include an integral output ORing diode in each power module, input power factor
correction, Class B EMI input filter, single-wire active current sharing
between power modules and a ±10% output voltage adjustment range from the front
panel. Among other features are AC and DC power good LEDs, overload and
short-circuit protection, zero minimum load and remote sensing. Control and
monitoring functions include AC and DC power good logic, remote enable input
and remote adjust (analog) input. Each module is self-cooled by an internal
ball-bearing fan.
The TMP Series in OEM quantities
are priced as low as $516 each for the hot-swap power modules and $435 for the
2U system rack. Delivery is 4 to 6 weeks ARO.
UNIPOWER Corporation designs,
manufactures and markets power solutions used in telecom, datacom,
workstations, networks, servers, data storage, industrial and medical systems.
For reader information
contact Applications Engineering, UNIPOWER Corporation, 3900 Coral Ridge Drive,
Coral Springs, FL 33065, (954) 346-2442 extension 400, fax (954) 340-7901. E-mail: apps@unipower-corp.com.
# #
#
